10% off hireT&Cs apply
1 / 2
Images are for illustration purposes only. Actual product may vary.
Hydraulic Auger for 5T Excavator hire
The Hydraulic Drive & Auger attachment is designed for use with 5-tonne excavators, providing a fast, efficient way to drill clean, accurately positioned holes in the ground. Powered directly from the excavator's auxiliary hydraulic circuit, the auger uses a heavy-duty rotating flight to bore into the ground and remove spoil as it drills. It is ideal for fencing, tree planting, landscaping, foundations, groundworks, drainage and other applications requiring repeated post or earth holes . Compared with manual post-hole digging, a hydraulic auger can significantly reduce labour and drilling time, making it particularly useful where a large number of holes are required.
No account needed · Secure checkout · Largest hire network
Everything you need to know about Hydraulic Auger for 5T Excavator hire
Description
Powered directly from the excavator's auxiliary hydraulic circuit, the auger uses a heavy-duty rotating flight to bore into the ground and remove spoil as it drills. It is ideal for fencing, tree planting, landscaping, foundations, groundworks, drainage and other applications requiring repeated post or earth holes.
Compared with manual post-hole digging, a hydraulic auger can significantly reduce labour and drilling time, making it particularly useful where a large number of holes are required.
Typical Applications
- Fence and gate post holes
- Tree and hedge planting
- Landscaping and groundworks
- Foundation and footing preparation
- Sign and bollard installation
- Drainage and utility work
- Agricultural and estate work
- General earth boring
- Repetitive post-hole drilling
Specification
| Specification | Typical figure |
|---|---|
| Suitable excavator | Approx. 1.5–3 tonne |
| Hydraulic flow | Approx. 27–65 L/min |
| Operating pressure | Approx. 70–240 bar |
| Speed | Approx. 36–87 rpm |
| Maximum torque | Up to approx. 2,847 Nm |
| Output shaft | 65 mm round |
| Drive unit width | Approx. 200 mm |
| Drive unit height | Approx. 585 mm |
| Drive unit weight | Approx. 48 kg |
| Typical auger diameters | 100–450 mm+ |
| Hydraulic connection | Excavator auxiliary hydraulics |
| Mounting | Excavator hitch / pin-mounted bracket |
Features
Hydraulic Auger for 5T Excavator
Which hydraulic auger attachments is right for you?
Hire diggers near you
Helpful articles
Tracked vs wheeled excavators
Is a tracked or wheeled excavator best for your project? We're comparing both types of digger to help you decide.
How to break up a concrete base
Breaking up a concrete base might sound difficult but with the right tools and a bit of know-how it's something that you can do yourself.
How to use a cement mixer
Never used a cement mixer before? Don’t worry! We are here to help guide you through a series of steps about how to use a cement mixer!
How to use acrow props
Find out a little more about acrow props and learn how to use them correctly.
How to mix concrete
You can create different mixes with cement & the consistency is all dependent on what your job requirements are. Learn how to mix them here!
How to use a wacker plate
Wacker plates are used on construction sites and on a range of DIY projects to ensure a strong, long-lasting base for the work. Read our blog to find out how to use a wacker plate.