Images are for illustration purposes only. Actual product may vary.
16T Excavator Breaker Attachment hire
£912.00 £820.80/week
(inc VAT)
What do you need?
Hydraulic Auger for 5T Excavator
NTH-858774
Hydraulic Auger for 1.5T Excavator
NTH-823568
Flat bucket for excavator
NTH-808838
Excavator Toothed Bucket
NTH-808837
8T Riddle Bucket
NTH-545233
8T Hydraulic Grab
NTH-823485
8T Excavator Breaker Attachment
NTH-392766
5T Hydraulic Grab
NTH-823446
5T Excavator Breaker Attachment
NTH-566445
3T Ripper Tooth Attachment
NTH-823457
3T Hydraulic Grab
NTH-823486
3T Excavator Breaker Attachment
NTH-520761
21T Riddle Bucket
NTH-545234
1T - 2.5T Hydraulic Grab
NTH-823487
16T Excavator Breaker Attachment
NTH-392786
1.5T Ripper Tooth Attachment
NTH-823457
1.5T Excavator Breaker Attachment
NTH-693219
14T Excavator Breaker Attachment
NTH-392788
13T Ripper Tooth Attachment
NTH-824568
13T Riddle Bucket
NTH-545232
13T Excavator Breaker Attachment
NTH-392708
0.8T Ripper Tooth Attachment
NTH-823456
0.8T Excavator Breaker Attachment
NTH-641203
No account neededSecure checkoutLargest hire network
Everything you need to know about 16T Excavator Breaker Attachment hire
Description
The 16-Ton Excavator Hydraulic Breaker is a heavy-duty hydraulic impact attachment designed for excavators in the approximately 14–20 tonne operating-weight class, with 16 tonnes as the nominal carrier size.
The breaker converts hydraulic power from the excavator's auxiliary circuit into repeated high-energy impacts through a hardened working tool.
It is designed for demanding construction, demolition, road and civil-engineering applications including:
- Reinforced concrete
- Heavy concrete foundations
- Concrete slabs
- Road and pavement breaking
- Asphalt
- Masonry
- Hard compacted ground
- Weathered rock
- Boulder reduction
- Quarry and groundworks
- Drainage
- Utility excavation
- General demolition
The attachment is designed to provide high impact energy while maintaining an appropriate attachment weight and balance for a 16-ton excavator.
Specification
| Item | Recommended specification |
| Product | 16-ton hydraulic excavator breaker |
| Nominal carrier | 16 t |
| Carrier range | 14–20 t |
| Working weight | 1,200–1,500 kg |
| Target weight | 1,250–1,400 kg |
| Overall length | Approx. 1,950–2,250 mm |
| Overall width | Approx. 500–600 mm |
| Overall height | Approx. 750–900 mm |
| Hydraulic flow | 100–140 L/min |
| Operating pressure | 150–180 bar |
| Maximum pressure | Approx. 200–220 bar |
| Impact frequency | Approx. 350–600 BPM |
| Tool diameter | 115–125 mm |
| Recommended tool | 120 mm |
| Tool length | Approx. 650–850 mm |
| Impact energy | Approx. 2,800–3,800 J |
Features
Which excavator equipment is right for you?
Hire diggers near you
Helpful articles
Tracked vs wheeled excavators
Is a tracked or wheeled excavator best for your project? We're comparing both types of digger to help you decide.
How to break up a concrete base
Breaking up a concrete base might sound difficult but with the right tools and a bit of know-how it's something that you can do yourself.
How to use a cement mixer
Never used a cement mixer before? Don’t worry! We are here to help guide you through a series of steps about how to use a cement mixer!
How to use acrow props
Find out a little more about acrow props and learn how to use them correctly.
How to mix concrete
You can create different mixes with cement & the consistency is all dependent on what your job requirements are. Learn how to mix them here!
How to use a wacker plate
Wacker plates are used on construction sites and on a range of DIY projects to ensure a strong, long-lasting base for the work. Read our blog to find out how to use a wacker plate.