10% off hireT&Cs apply
Images are for illustration purposes only. Actual product may vary.
5T Excavator Breaker Attachment hire
What do you need?
0.8t excavator breaker attachment
NTH-641203
1.5t excavator breaker attachment
NTH-693219
3t excavator breaker attachment
NTH-520761
5t excavator breaker attachment
NTH-566445
8t excavator breaker attachment
NTH-392766
13t excavator breaker attachment
NTH-392708
14t excavator breaker attachment
NTH-392788
16t excavator breaker attachment
NTH-392786
No account neededSecure checkoutLargest hire network
Everything you need to know about 5T Excavator Breaker Attachment hire
Description
The 5-Ton Excavator Hydraulic Breaker is a heavy-duty hydraulic impact attachment designed for excavators in the approximately 4–7 tonne operating-weight class, with 5 tonnes as the nominal machine size.
The breaker converts hydraulic power from the excavator's auxiliary circuit into repeated high-energy impacts through a hardened working tool.
It is designed for:
- Reinforced and non-reinforced concrete
- Concrete slabs
- Foundations
- Masonry
- Asphalt
- Road surfaces
- Hard compacted material
- Weathered rock
- Drainage and utility work
- General demolition
For a 5-ton excavator, the breaker should provide a good balance between impact energy, attachment weight and excavator stability.
Specification
| Item | Recommended specification |
| Product | 5-ton hydraulic excavator breaker |
| Nominal machine | 5.0 t |
| Carrier range | 4–7 t |
| Working weight | 300–400 kg |
| Target standard weight | 330–360 kg |
| Overall length | Approx. 1,350–1,600 mm |
| Overall width | Approx. 280–350 mm |
| Overall height | Approx. 450–600 mm |
| Hydraulic flow | 35–65 L/min |
| Operating pressure | 100–150 bar |
| Maximum relief pressure | Approx. 160–170 bar |
| Impact frequency | Approx. 550–1,200 BPM |
| Tool diameter | 68–75 mm |
| Tool working length | Approx. 350–500 mm |
| Impact energy | Approx. 500–800 J |
Features
Which excavator breaker attachment is right for you?
Hire diggers near you
Helpful articles
Tracked vs wheeled excavators
Is a tracked or wheeled excavator best for your project? We're comparing both types of digger to help you decide.
How to break up a concrete base
Breaking up a concrete base might sound difficult but with the right tools and a bit of know-how it's something that you can do yourself.
How to use a cement mixer
Never used a cement mixer before? Don’t worry! We are here to help guide you through a series of steps about how to use a cement mixer!
How to use acrow props
Find out a little more about acrow props and learn how to use them correctly.
How to mix concrete
You can create different mixes with cement & the consistency is all dependent on what your job requirements are. Learn how to mix them here!
How to use a wacker plate
Wacker plates are used on construction sites and on a range of DIY projects to ensure a strong, long-lasting base for the work. Read our blog to find out how to use a wacker plate.