150mm Wet & Dry Diamond Core Drill & Stand hire

150mm Wet & Dry Diamond Core Drill & Stand Hire Drill Through Stone, Brick, Masonry, Steel, Marble & More! Our medium duty wet/dry diamond core drill and stand for hire offer professional and reliable core drilling for a range of jobs on site. These two products combined allow you to drill high quality, accurate and precise holes into a range of tough materials that standard drills can’t manage, such as brick, concrete, masonry, marble and steel. Whether you are a plumber installing piping, an electrician installing cable, or a contractor installing ventilation, this Husqvarna medium duty wet/dry diamond core drill and stand offer a fantastic solution. The Husqvarna DM 230 medium duty diamond core drill included in this package is a powerful and reliable piece of core drilling equipment. Featuring a robust 3 speed motor, this medium duty core drill is capable of drilling cores up to 150mm in diameter when mounted on the stand. The Husqvarna DM 230 diamond core drill has a range of high quality features which allow it to perform to the highest standards on site. A water cooled gearbox helps to extend the life of the gearbox and gaskets, and provides optimal drilling performance when working with tough materials. Softstart is an innovative feature which uses an electronic current limiter to start drilling slowly when the trigger is pulled, and then increase the speed two seconds later. This helps to protect the drill from overloading and provides clean and accurate core drilling. This diamond core drill also has Husqvarna's Elgard feature, which provides electronic overload protection by making the drill pulsate to indicate to the operator when the machine is overloaded. If the load is not reduced then the motor will shut off to protect the drill. The Husqvarna DS 150 drill stand that comes included in this package is a solid, robust and reliable piece of equipment which allows you to complete a range of challenging core drilling jobs to the highest standards. This diamond core drill stand allows for angled drilling - from 90 degrees to 60 degrees - and it can be used vertically or horizontally. This means that the stand can be set up for drilling into walls, floors or ceilings. This diamond core drill stand is also a lightweight and convenient piece of equipment. It can be transported without a fuss, carried to wherever it is needed on site, and set up quickly and easily. Featuring a strong and robust carriage with guide rollers, this drill stand holds the diamond core drill firmly in place and lowers it to drill into the material smoothly and safely. The integrated vacuum base allows you to connect the stand to a dust removal vacuum unit very easily. This improves safety on site and reduces the amount of mess created while drilling.

Rated Input Power 1.85kW Drill Bit Diameter Handheld, Max 80mm Drill Bit Diameter with Stand, Max 150mm Sound Power Level, Guaranteed (LWA) 108dB(A) Sound Power Level, Measured 107dB(A) Sound Pressure Level at Operators Ear 93dB(A) Number of Gearbox Speeds 3 Water Connector G 1 / 4"" Length 438mm Width 145mm Based On Husqvarna DS 150 Drill Stand Maximum Drill Bit Diameter 150mm Maximum Drill Bit Length with Recommended Drill Motor 497mm Maximum Travel Length 495mm Stand Length 639mm Stand Width 266mm Stand Height 850mm Stand Weight 15.5kg