Cordless angle grinder (125mm) hire

125mm Cordless Angle Grinder Hire

For Cutting & Grinding Metal & Stone

These cordless 125mm angle grinders are robust and versatile pieces of equipment, ideal for cutting stone and metal, removing rust, or polishing metal. These 125mm cordless angle grinders combine performance with practicality perfectly. As they are cordless power tools, there are no restrictive cables. This allows you to work anywhere - in a workshop or on a work site –- even in confined spaces and in areas without immediate access to a mains electrical supply. Powered by the new Lithium-ion batteries, which are 40% lighter than traditional NiCD or NiMH batteries, these 125mm cordless angle grinders are capable of rapid recharge. We supply our cordless angle grinders with 2 batteries and a 240v charger. This allows you to charge one battery whilst you use the other, and swap over when the first battery runs out of power. This way, you will never need to down tools to recharge.

125mm Metal Grinding Disc - This depressed centre disc is perfect for grinding steel and dressing welds.

125mm Metal Cutting Disc - This flat cutting disc is ideal for cutting steel.

125mm P3-M Mortar Raking Diamond Blade - This blade is an economical solution in preparation for re-pointing brick and block work. Dimensions: 125 x 6 x 7 x 22.2mm.

125mm P3-B Diamond Blade - This masonry cutting diamond blade offers unrivalled performance when compared to other low cost blades. Dimensions: 125 x 2.2 x 7x 22.2mm.

Ideally Suited - Lightly reinforced concrete, concrete, slabs, kerbs, pipes, beams, concrete flag stones, York stone, concrete paviors, general facing bricks, hand-made bricks and concrete roof tiles.

Occasional Use - Flint aggregate concete, class B engineering bricks, heavily reinforced concrete, medium reinforced concrete, lightweight concrete blocks, green concrete and cement screed (too much use on these materials could result in either overheating or rapid wear).

125mm P5-C12 Diamond Blade - With a 12mm diamond segment, this blade cuts through all types of concrete products, building materials and abrasive materials. Dimensions: 125 x 2.2 x 12 x 22.2mm.

Ideally Suited: Lightly reinforced concrete, concrete, slabs, kerbs, pipes, beams, concrete flag stones, York stone, concrete paviors, general facing bricks, hand-made bricks & concrete roof tiles.

Occasional Use: Class A engineering bricks, clay products, flint aggregate concete, class B engineering bricks, heavily reinforced concrete, medium reinforced concrete, lightweight concrete blocks, green concrete & cement screed.

<table border="1">
<tbody>
<tr>
<td>Battery Type</td>
<td>Lithium-ion</td>
</tr>
<tr>
<td>Battery Quantity (5.0ah)</td>
<td>2</td>
</tr>
<tr>
<td>Bore Diameter</td>
<td>22.23mm</td>
</tr>
<tr>
<td>Max Wheel Thickness</td>
<td>6.4mm</td>
</tr>
<tr>
<td>Noise Sound Pressure</td>
<td>79dB(A)</td>
</tr>
<tr>
<td>Noise K Factor</td>
<td>3dB(A)</td>
</tr>
<tr>
<td>Max Wheel Diameter</td>
<td>125mm</td>
</tr>
<tr>
<td>No Load Speed</td>
<td>8,500rpm</td>
</tr>
<tr>
<td>Vibration K Factor</td>
<td>1.5m/sec²</td>
</tr>
<tr>
<td>Vibration (Surface Grinding)</td>
<td>6.0m/sec²</td>
</tr>
<tr>
<td>Vibration (Disc Sanding)</td>
<td>2.5m/sec²</td>
</tr>
<tr>
<td>Net Weight</td>
<td>2.6kg</td>
</tr>
</tbody>
</table>

<p><strong>Please note:</strong> This product description and specification is based on the model most widely stocked across our network of partner stores. Alternative brands of equivalent specification may be supplied based on location and availability.</p>

• 18v Lithium-ion Battery
• Simple Operation
• Ergonomic Handle & Side Handle
• 240v Charger Included